Product Line


Zoom +

WEH® Connector TW111 for filling refrigerants on Schrader valves 1/4" SAE, blue (low pressure), chloroprene seal, max. 42 bar, 90° media inlet UNF 7/16"-20 male thread

Add to Compare
  • For connection to Schrader valves
  • No frostbitten or burned hands
  • 99 % less refrigerant loss
  • Connection in seconds
  • No hand tightening required
Video
  • WEH® TW111 | Instant connection to HVAC-R service ports
    WEH® TW111 | Instant connection to HVAC-R service ports
    The quick release couplers with their distinctive blue and red colour coding for the low and high pressure side of AC systems are the ideal tool for filling / charging of refrigerants (R134a). They connect instantly to the Schrader SAE 1/4" service port and are available as straight or 90° elbow couplings. When disconnecting hazardous discharge of refrigerant is reduced by 99 %. No twist, no turn, no hand-tightening. Just push to connect.
  • WEH® TW111 with 90° media inlet, low pressure (blue) | Function
    WEH® TW111 with 90° media inlet, low pressure (blue) | Function
    The WEH® TW111 filling connector connects in seconds to the Schrader valve thus facilitating filling of refrigeration equipment with refrigerants and increasing your productivity. The use is quite simple. Only pull back the sliding sleeve of the quick coupling and place the connector onto the Schrader valve thread. When pushing the sliding sleeve forward, the clamping jaws are locked and the internal stop valve opens. Refrigerant filling can now begin.
Description
WEH® Connector TW111 for filling refrigerants on Schrader valves 1/4" SAE, blue (low pressure), chloroprene seal, max. 42 bar, 90° media inlet UNF 7/16"-20 male thread

Thanks to the easy push & pull actuation, the TW111 connects to Schrader port UNF 7/16“ –20 male thread (equivalent to 1/4" – SAE tube connection) in just seconds. The safe and pressure-tight connection is established without continuous screwing and unscrewing of threaded ports. Thus the operator's joints are protected from injuries arising from repetitive motion. Work flows are considerably facilitated and a high operating comfort is achieved.

In addition, the WEH® TW111 filling connector reduces the loss of refrigerant by up to 99%. An integrated shut-off valve allows only a minimum of refrigerant to escape into the air. Besides environmental protection, the operator is protected from cold burns to the hands.

The small outer diameter of only 25 mm simplifies the connection procedure to test pieces in restricted areas. Thus not only connection times are reduced, but also costs are cut and the productivity is increased.

The service connector is rated for an operating pressure of max. 42 bar and has a 90° media inlet, a chloroprene front seal and a colour coded blue sliding sleeve for the low pressure connection port of the customer.

The Connector is also available with inline media inlet and red sliding sleeve for the low pressure connection port and is also available in convenient Pro Sets (consisting of service connector TW111 for the high pressure port (red) and for the low pressure port (blue), front seal set (5 units) and O-ring picker).

Features
  • For connection to Schrader valves
  • No frostbitten or burned hands
  • 99 % less refrigerant loss
  • Connection in seconds
  • No hand tightening required
  • WEH® Jaw Locking Mechanism
  • Reduces connection times and costs
  • Different versions available
  • High-grade materials
Technical Data
Max. allowable operating pressure PS 42 bar (610 psi)
Temperature range -10 °C up to +80 °C
Connects to UNF 7/16"-20 male thread
Media inlet UNF 7/16"-20 male thread
Actuation Manual actuation via sliding sleeve
Design With integrated shut-off valve
Material Brass and anodized aluminium
Sealing material chloroprene
Part No. C1-102994
Application
Quick Connector for filling and evacuating refrigerants of industrial refrigerating and air conditioning systems with Schrader valves 1/4" SAE tube connection acc. to SAE J513.
Downloads
Document type Format Size Download
Datasheet PDF 306 KB
Press release PDF 797 KB
Quick Facts PDF 212 KB
Inquiry List

 

You have no items in your inquiry list.

Read more

Service quick coupling for filling refrigerants with Schrader valves - WEH® TW111

The service quick coupler TW111 with 90° media inlet is the ideal service port access fitting for charging and recharging refrigerants and air conditioning plants with Schrader valves. The service coupler connects instantly to your external threaded service port of RAC systems / ACR systems. The TW111 offers quick connect and quick disconnect thanks to the WEH® Jaw Locking Mechanism and the easy to operate sliding sleeve. The service quick coupler also eliminates hazardous discharge of refrigerant from low-side of system when disconnecting. Applications are recharging of home air conditioners and refrigerators.

Back to Top