Product Line


Zoom +

WEH® Connector TW17P for metric ISO female thread DIN 13 (DIN 3852), M22x1.5, pneumatic actuation, max. 50 bar

Add to Compare
  • Automation possible
  • Connection in seconds
  • No hand tightening required
  • Increased productivity & Cost reductions
  • WEH® Jaw Locking Mechanism
Description
WEH® Connector TW17P for metric ISO female thread DIN 13 (DIN 3852), M22x1.5, pneumatic actuation, max. 50 bar
The WEH® TW17P Quick Connector for leak testing connects to metric ISO female threads.
The higher the test pressure, the tighter the WEH® Connector will clamp itself into the thread of the test piece thus establishing a leak tight connection in just seconds. The front O-ring reliably seals the connection and can be easily replaced at each maintenance.
Additional sealants and sealing tapes are not required.

Time-consuming and expensive clamping and testing devices are eliminated. The TW17P is therefore the ideal tool for frequent connection and disconnection.

Bores have been added as standard to the clamping jaws for body sizes 5 – 6 of the WEH® TW17P Connector for increased medium flow. This modification is also available on request for body sizes 1 – 4. Please contact us.

The WEH® TW17P Connector is equipped with a pneumatic actuation for external manual, semi or fully automatic control systems and available for low pressure up to max. 50 bar.

Special designs such as longer or shorter versions of the connector, versions with hydraulic actuation, plug versions etc. are available on request.
Features
  • Automation possible
  • Connection in seconds
  • No hand tightening required
  • Increased productivity & Cost reductions
  • WEH® Jaw Locking Mechanism
  • Ergonomic design
  • High-grade materials
  • Testing devices are eliminated
Technical Data
Max. allowable operating pressure PS 50 bar (725 psi)
Pilot pressure 6 - 12 bar ( 90 - 175 psi) compressed air
Temperature range +5 °C up to +80 °C
Connects to M22x1.5 female thread
Media inlet G1/2" female thread
Leak rate 1 x 10-3 mbar x l/s
Actuation P = pneumatic actuation for automated applications and activations
Material Corrosion resistant stainless steel, anodized aluminium
Sealing material Front seal of NBR
Part No. C1-15558
Application
Quick connect / disconnect for pneumatic and hydraulic pressure testing and function testing of components with female thread for the following standard sizes:

  • Metric ISO thread to DIN 13 | M22x1.5 female thread

The TW17P Connector is suitable for automated testing engine / engine blocks, tanks, pressure vessels, oil coolers, steering racks, filler cap ports, pressure transducers, aggregates, hoses and hydraulic components, hydraulic components and for automated testing systems, automatic production test benchs and robotics.

The WEH TW17P Test Connector is also used in the field of electric mobility, e.g. for leak tests of the cooling circuit and oil modules of electric motors, battery cases and solar batteries.
Downloads
Document type Format Size Download
Press release PDF 636 KB
Product Information PDF 596 KB
Datasheet PDF 554 KB
Inquiry List

 

You have no items in your inquiry list.

Back to Top