The WEH® TK17 H₂ 35 MPa has been developed for refueling fuel cell electric cars with compressed hydrogen (CGH₂).
The fueling nozzle with single-handed operation is just as quick and easy to use as the common petrol nozzle and has a similar look and feel. Simply lift the nozzle from the dispenser and place it onto the vehicle‘s receptacle.
250° rotation makes for easy engagement with the vehicle‘s fuel receptacle.
Compress the actuation lever until the locking lever engages and the fueling procedure begins. The hydrogen can only flow through the line if there is a safe connection.
After refueling disengage the nozzle‘s locking lever and disconnect. Please note that refueling may be stopped or paused at any time.
The hand grip has a magnet for actuation of the magnet switch for activation of the dispenser.
The internal coding for pressure range and gas type ensures that the WEH® TK17 H2 35 MPa can be connected to the compatible WEH® Receptacles and also prevents the risk of confusion with natural gas.
- Type C nozzle acc. to SAE J2600:2002, paragraph 5.2
- Left or right single-handed operation
- Compatible with the WEH® TN1 H₂ receptacle profile
- WEH ® EASY-TURN swivel joint approx. 250°
- Easy operation
- Extremely high flow rate -> short filling times
- Plastic thermal protection
- Hand grip with magnet
- WEH® Jaw Locking Mechanism
- High-grade materials
- Coding for pressure range / gas type
Nominal bore (DN) | 4 mm |
Pressure range | PN = 35 MPa | PS = 49 MPa |
Temperature range | -40 °C up to +85 °C |
Media inlet | UNF 7/16"-20 male thread, SAE J514, 37° cone |
Material | Corrosion resistant |
Sealing material | Hydrogen compatible |
Design | With plastic thermal protection and hand grip with magnet. Without gas recirculation |
Weight | Approx. 1.8 kg (3.97 lbs.) |
Conformity / Tests / Approvals | Tests acc. to SAE J2600:2002 |
Medium note | Suitable for pre-cooled hydrogen |
Nozzle type | Type C acc. to SAE J2600:2002, paragraph 5.2 |
Part No. | C1-174292 |