Product Line


Zoom +

WEH® Fueling Nozzle TK17 H2 70 MPa ENR with ATEX data interface, for fast filling of cars, self-service

Add to Compare
  • Left or right single-handed operation
  • Compatible to receptacle WEH® TN1 H2 70 MPa
  • Exchangeable nozzle receiver (ENR)
  • Integrated purging line for nitrogen purging
  • Prepared for dispenser mounting with purging system
Description
WEH® Fueling Nozzle TK17 H2 70 MPa ENR with ATEX data interface, for fast filling of cars, self-service
The WEH® TK17 H2 70 MPa ENR with exchangeable nozzle receiver (ATEX data interface) was developed for refueling fuel cell cars with compressed hydrogen (CGH2).
The fueling nozzle provides the same proven characteristics as the actual known TK17 H2 70 MPa.

The IR data interface which is located at the front part of the fueling nozzle ensures proper communication between the vehicle and the fueling station thus achieving the optimum filling level.

So far the complete fueling nozzle has had to be sent in for repair in case of damage or malfunction of the data interface. With this version of the TK17 H2 70 MPa, however, the data interface can now be easily exchanged by specially trained personnel on the spot and within a very short time. Downtimes are reduced.

The continuous rubber protection offers optimal protection not only for the fuel cell electric vehicle and the front part of the fueling nozzle against damage, impacts and weather-related influences, but also for the operator against frostbitten hands.

The new TK17 H2 70 MPa ENR is additionally equipped with a purging line, that allows purging with nitrogen during and after fueling process. This can prevent ingress of moisture and formation of ice crystals when filling with pre-cooled hydrogen. Removing the fueling nozzle from the receptacle is thus facilitated even in unfavorable climatic conditions.

The internal coding for pressure range and gas type ensures that the WEH® TK17 H2 70 MPa ENR can be connected to the compatible WEH® Receptacles and also prevents the risk of confusion with natural gas.
Features
  • Left or right single-handed operation
  • Compatible to receptacle WEH® TN1 H2 70 MPa
  • Exchangeable nozzle receiver (ENR)
  • Integrated purging line for nitrogen purging
  • Prepared for dispenser mounting with purging system
  • WEH® EASY-TURN swivel joint approx. 250°
  • Increased robustness
  • Easy operation
  • Extremely high flow rate -> short filling times
  • Protecion against impact and cold
  • Plastic thermal protection
  • Hand grip with magnet
  • WEH® Jaw Locking Mechanism
  • High-grade materials
  • Coding for pressure range / gas type
Technical Data
Nominal bore (DN) 4 mm
Pressure range PN = 70 MPa | PS = 87.5 MPa
Temperature range -40 °C up to +85 °C
Media inlet UNF 9/16"-18 male thread, 60° inner cone
Material Corrosion resistant
Sealing material Hydrogen compatible
Design With plastic thermal protection, cold protection, hand grip with magnet,
exchangeable data interface acc. to SAE TIR J2799 and integrated purging line
Weight Approx. 2.4 kg (5.29 lbs.)
Conformity / Tests / Approvals Fueling nozzle: SAE TIR J2799, tests acc. to SAE J2600:2002
IR data interface: ATEX
Medium for purging Nitrogen
Nominal bore (DN) of purging line 4 mm
Media temperature range of purging medium -20 °C up to +85 °C
Flow rate during purging 500 l/h
Part No. C1-160702-X01
Application
Fueling nozzle with ATEX interface for H2 fast filling of electric / hybrid cars with fuell cells (FCV) at self-service fueling stations.
Downloads
Document type Format Size Download
Datasheet PDF 485 KB
Product Information PDF 484 KB
Inquiry List

 

You have no items in your inquiry list.

Back to Top