-
WEH® TW05 | Efficient leak testing during series productionThe leak tightness of pneumatic components is one of the essential quality requirements of series production. The WEH® TW05 Quick Connector has been especially designed for the purpose of leak testing during the manufacturing process. Safe and pressure-tight connections are made in just seconds. With this quick coupling pneumatic components with internal threads of the most diverse connection configurations are tested faster than ever before.
The WEH® TW05 quick connector is the ideal tool for function, pressure and leak testing. Pneumatic components with internal thread can thus be tested faster than ever before during series production.
Safe and pressure-tight connections to internal threads of the most diverse connection standards can be established in just seconds - without tedious hand tightening.
Connecting and pressurising the test piece with 5 - 12 bar is accomplished in one operation. By simple actuation of the sliding sleeve, the patented WEH® clamping jaws spread apart and grip into the threaded test piece port.Additional sealants are not required. Complex and expensive clamping and testing devices are eliminated.
For automated testing procedures (frequent connections), the TW05 is also available with control housing instead of the sliding sleeve. With this version, actuation is carried out via external control and pressure lines. Thanks to the automated testing procedures, considerable time and cost savings are achieved.
The quick connector pays off within shortest time: Testing times are reduced, workflows improved and productivity is enhanced.
- Connection in seconds
- No hand tightening required
- WEH® Jaw Locking Mechanism
- Simple seal replacement
- Ergonomic design
- Compact design
- High-grade materials
- Automation possible
Max. allowable operating pressure PS | 5 - 12 bar (73 - 175 psi) compressed air |
Temperature range | +5 °C up to +80 °C |
Connects to | NPT 1/2" internal thread |
Media inlet | G1/2" internal thread |
Leak rate | 1 x 10-3 mbar x l/s |
Actuation | Manual actuation via grip sleeve |
Material | Clamping jaws: Corrosion-resistant stainless steel Outer parts: Anodized aluminium |
Sealing material | NBR |
Conformity / Tests / Approvals | PED 2014/68/EU |
Part No. | C1-11255 |
Quick coupler for pressure testing / function testing / leak testing with compressed air of pneumatic components with internal threads for the following standard sizes:
- NPT thread (ANSI/ASME B1.20.1-1983) | NPT 1/2" internal thread
The TW05 Connector is suitable for testing pneumatic cylinders / mini-cylinders, pneumatic valves, fixtures, air engine, pivot drives, radiators and pneumatic tools.